Lubricating The Brew Group - Gaggia Milano NAVIGLIO MILK User Manual

ENGLISH
24
Naviglio milk en-nl-pl.indd 24
2 Make sure that the yellow locking hook of the brew group is in the right
position.
To correctly position the hook, push it upwards to the highest possible position.
3 Reinsert the brew group in the machine along the side guides until it locks in
the right position with a click.
Warning: do not press the PUSH lever.
4 Close the service door.

Lubricating the brew group

In order to ensure the perfect performance of the machine, it is necessary
to lubricate the brew group. Refer to the following table for the frequency of
lubrication.
Frequency of use
Low
Regular
High
1 Turn off the appliance and disconnect the power cord.
2 Remove the brew group and rinse it using lukewarm water (see "Brew Group
Cleaning under Running Water").
3 Apply a thin layer of the lubricant provided around the inserting pin on the
lower part of the brew group.
Number of beverages prepared
daily
1-5
6-10
>10
Frequency of
lubrication
Every 4 months
Every 2 months
Every month
01/08/2019 09:46:45