Gaggia Milano NAVIGLIO MILK User Manual page 27

Naviglio milk en-nl-pl.indd 27
12 Start the rinse cycle by pressing the flashing "
13 The machine starts dispensing water from the steam/hot water wand (the "
" button glows steady) and from the dispensing spout (the "
steady).
14 At the end of the rinse cycle, the
process has been completed.
Note: If the tank is not filled up to the MAX level for the rinse cycle, the
light keeps on flashing and the
performed; repeat steps 9 to 13.
15 Remove and empty the container.
16 Empty the drip tray and place it back.
17 Remove the water tank, rinse it carefully. Reinstall the "INTENZA+" water filter
(if any). Fill the water tank with fresh water up to the MAX level and insert it back
into the machine.
18 Remove and rinse the brew group (see "Coffee Group Cleaning" chapter).
19 The machine is now ready for use.
" button.
LED light turns off and the descaling
LED light turns on; another cycle may need to be
ENGLISH
27
" button glows
LED
01/08/2019 09:46:50