Lubricating The Brew Group - Gaggia Milano MAGENTA MILK Operating Instructions Manual

CLEAN
BREW GROUP
QUICK MILK CLEAN
DEEPMILK CLEAN
DESCALING
4219-465-02541 MAN. GAG. MAGENTA Milk EN-NL-PL Rev 02.indd 23
Cleaning the brew group with cleaning tablets for the
removal of oily coffee residues
Warning: use only Gaggia cleaning tablets to remove oily coffee residues.
1 Place a container under the coffee dispensing spout.
2 Press the CLEAN/SET
the display.
3 Select "BREW GROUP CLEANING" and press the "
START/STOP button to start the cleaning procedure.
START/STOP
4 Follow the instructions shown on the display to clean the brew group correctly.
5 The procedure will take approximately 5 minutes. START/STOP
can be used to pause and resume the procedure.

Lubricating the brew group

In order to ensure the perfect performance of the machine, it is necessary
to lubricate the brew group. Refer to the following table for the frequency of
lubrication.
Frequency of use
Low
Regular
High
1 Turn off the appliance and disconnect the power cord.
2 Remove the brew group and rinse it using lukewarm water - see the "Cleaning
the brew group under running water" chapter.
3 Apply a thin layer of the lubricant provided around the insertion pin on the
lower part of the brew group.
button and select the "CLEAN " button shown on
clean/setting
Number of beverages prepared
daily
1-5
6-10
>10
English
23
" button, then press
button
START/STOP
Lubrication
frequency
Every 4 months
Every 2 months
Every month
09/09/2020 16:48:10