Changing The Presser Foot - VERITAS Claire Instruction Manual

Changing the presser foot

1
1
2
1
2
Turn the power switch to off ("O")
when carrying out any of the below
operations!
Removing the presser foot
Raise the presser foot.
Press the lever and the foot disengages.
1
Attaching the presser foot
Lower the presser foot holder until the
cut-out is directly above the pin.
Press the lever.
The presser foot engages automatically.
1
2
Removing and inserting the presser
foot holder
Raise the presser foot bar. Align the
presser foot holder with the lower
left side of the presser bar. Hold the
presser foot holder, then tighten the
screw using the screwdriver.
1
2
Inserting the edge/ quilting guide
1
Insert the edge/ quilting guide in the
slot as illustrated. Adjust according to
need for hems, pleats, etc.
1
2
2
21
Attention:
Lever
Cut-out
Pin
Presser foot bar
Presser foot holder
Slot
Edge/ quilting guide