VERITAS Claire Instruction Manual page 71

Use the arrow " " or " " button
to check what you have programmed.
Press the " " button to leave the
memory mode and return to the direct
mode.
Attention:
The selected pattern will be cleared from
the memory module after closing the
machine if you do not press the " "
button again when you have completed
your selection.
Adding patterns or letters
While in the memory mode, press
the " " button or the " "
button until the stitch number you have
selected is displayed, then add the new
stitch or change the stitch length, width,
auto-stop or mirror, if desired.
Clearing patterns or letters
If you wish to delete a certain stitch
within the memory mode, use the "
" button or " " button until the actual
stitch number is displayed.
Press the " " button to delete the
selected pattern and the next pattern in
the back moves forward.
69