VERITAS Claire Instruction Manual page 58

- Attach the zipper foot. Attach the
right side of the presser foot pin to the
holder when sewing the left side of
the zipper. Attach the left side of the
presser foot pin to the presser foot
holder when sewing the right side of
the zipper.
- Sew the zipper to the piece of fabric
with the extra 3 mm (1/8"), starting
from the base of the zipper. When
you are about 5 cm (2") from the
end of the zipper, stop the sewing
machine with the needle lowered
(in the fabric), raise the presser foot
lever, and then open the zipper and
continue sewing.
- Turn the fabric right side out, stitch
across the lower end and the right
side of the zipper.
- Stop about 5cm (2") from the top of
the zipper. Remove the basting and
open the zipper. Stitch the remaining
of the seam.
56