Table of Contents
Advertisement
6.10 Coolantcompound table
BA 1404 en – Edition 2.7 * 1404b610.fm
• Do not jump off the cabin.
• Picking up and raising loads repeatedly must be limited to a minimum.
Reference:
The vibration values and calculations are based on the indications made in ISO/TR 25398
Mechanical Vibrations – Guidelines for assessment of exposure to whole-body vibration
during operation of earth moving machines.
The harmonized data comply with measurements made by international institutes, organi-
zations and manufacturers. This publication offers information on the calculation of whole-
body vibrations for operators of earth moving machines. This method is based on vibration
measurements under real operating conditions for all machines. Read the original guide-
lines. This chapter summarizes part of the legal regulations. However, its aim is not to
replace the original references. Other parts of this document are based on information of
the United Kingdom Health and Safety Executive.
For more information on vibration, refer to Directive 2002/44/EC of European Parliament
and Council on minimum health and safety requirements regarding exposure of workers to
risks arising from physical agents (vibration).
Your Wacker Neuson dealer provides information on other machine functions reducing
vibration and on safe operation.
1
Outside temperature
Up to °C (°F)
-37 (-34.6)
1.
Use the 1:1 concentration for warm outside temperatures, too, to ensure protection against corrosion, cavitation, and deposits.
2.
Do not mix the coolant with other coolants.
Technical data
2
Water
Coolant
% by volume % by volume
50
50
6-7
- Quick Links:
- Operating Hydraulics
Hide quick links:
Advertisement
Table of Contents
