Brief Description; Traveling Drive; Operating Hydraulics; Cooling System - Wacker Neuson E09-01 Operator's Manual

1.3

Brief description

Traveling drive

Operating hydraulics

Cooling system

Cab (ROPS)

BA 1404 en – Edition 2.7 * 1404b110.fm
The model 1404 excavator is a self-propelled work machine.
Get informed on and follow the legal regulations of your country.
This machine is a versatile and powerful helper for moving earth, gravel and debris on con-
struction sites and elsewhere. A wide range of attachments accounts for the numerous
applications of the machine, among others hammer and grab applications.
See chapter 1.4 Fields of application, attachments for further applications.
The main components of the machine are:
• ROPS (Roll Over Protective Structure) tested canopy (open version)
• ROPS (Roll Over Protective Structure) tested cab (closed version, option)
• Model 1404: water-cooled Yanmar three cylinder diesel engine
• Sturdy steel sheet chassis Rubber mounted motor
Notice!
The machine can be equipped with the "Telematic" option (for transmitting oper-
ating data, location, etc. via satellite)!
The diesel engine permanently drives the gear pump whose oil flow is sent to a hydraulic
motor.
The diesel engine drives the joint gear pump for the work hydraulics. The oil flow of this
pump depends on the diesel engine speed only.
The indicator lights in the instrument panel of the machine ensure constant monitoring of
the engine and hydraulic oil temperature, as well as of the coolant temperature and level.
Modifying or performing improper repair work on the cabin is dangerous. Do not modify the
cabin. Repair work may only be performed by a Wacker Neuson service center. If the cab
has been damaged, check it before resuming work and have it repaired if necessary.
Please contact a Wacker Neuson dealer for support. Failure to follow this precautionary
measure can lead to serious or fatal injuries. The cab has been specially designed for the
driver's protection in case of an accident.
Fasten your seat belt, otherwise you can be thrown around or even outside the cab and
crushed. Therefore always fasten your seat belt as you drive and work with the machine.
Tighten the seat belt before putting the machine into operation.
Introduction
1-3