Operating Celladvisor 5G; Glancing At Menus And Icons - Viavi CellAdvisor 5G User Manual

CellAdvisor 5G User's Guide
Warning
10
message
11 Toast message This shows a toast message that indicates the user's action. Up to 10 messages are popped up.
Measurement
12
screen
Quick access
13
and display tab

Operating CellAdvisor 5G

CellAdvisor 5G provides an easy-to-use touch-based user interface that users can easily operate.
There are four ways to operate the CellAdvisor 5G as below.
Method 1: The Quick Access and Display tab in the upper part of the screen enables you to set each spectrum measurement for
the selected measure. You can simply tap it and set the parameters.
Method 2: The first icon, Menu (
simply tap it and set the parameters.
Method 3: The third icon, Full Menu (
simply tap it and set the parameters.
Method 4: CellAdvisor 5G provides you with finger touch gesture operation for the Center Frequency, Span Frequency and
Reference Level. For how to use gestures, see the following table.
Finger Touch Gesture
Gestures
Tap and drag left and right to change the Center
Frequency.
Tap two fingers and pinch in to change the Span
Frequency.

Glancing at menus and icons

There are menus and icons that you need to get familiar with to operate CellAdvisor 5G efficiently.
Quick access and display tab
The Quick access and display tab displays parameters to be set based on the Mode and Measurement that you have set. The
following table shows the example of the Sweep Tuned Spectrum in SA mode.
19
This shows the warning message that you need to be aware of.
This is a measurement result screen.
This is a quick access and display tab. You can quickly access the menus and parameters. Once
you tap it, the tab that you have selected outlines purple.
) on the Side bar provides test parameters to set for the selected measure. You can
) on the Side bar provides test parameters to set for the selected measure. You can
Description Gestures
Tap and drag up and down to change the Reference
Level.
Tap two fingers and pinch out to change the Span
Frequency.
Description