Setting The Parameters; Setting The Date And Time - Baxi POWER HT+ Series Installation And Service Manual

9 Settings
P P arameter Parameter
number
8330 H H ours run 1st stage
8526 S S olar Gain 24 Hour
8527 T T otal Solar Gain
8530 H H ours run solar
8531 H H ours run collect
overtemp
8532 H H ours run collector
pump
Tab.54 Menus B B urner control
Parameter Parameter
number
9512 R R equired speed
ignition
9524 R R equired speed LF
9529 R R equired speed HF
6624 M M anual source lock
9.2

Setting the parameters

Fig.77
18. February 2014
Tuesday
1.5 bar
MENU
Fig.78
----------------------------------------------------
Information
Set time and date
MENU
86
Description
Value reset
Description
Ignition speed set point adjustable on the operating interface.
Rotation speed set point at partial load adjustable on the operating inter­
face.
Rotation speed set point at nominal load adjustable on the operating in­
terface.
14:13
MENU
MW-3000052-EN-02
MW-3000053-EN-02

9.2.1 Setting the date and time

1. Press the key to access the parameters.
MENU
2. Select the S S et time and date menu by turning the
Factory set­
ting
Factory
setting
button.
7609474 - v02 - 04092014