Omron HD Safety Manual page 4

Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or reg-
ulations which apply to the combination of the Product in the Buyer's application or use of the
Product. At Buyer's request, Omron will provide applicable third party certification documents
identifying ratings and limitations of use which apply to the Product. This information by
itself is not sufficient for a complete determination of the suitability of the Product in com-
bination with the end product, machine, system, or other application or use. Buyer shall be
solely responsible for determining appropriateness of the particular Product with respect to
Buyer's application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE
OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN
DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS
PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL
EQUIPMENT OR SYSTEM.
Programmable Products
Omron Companies shall not be responsible for the user's programming of a programmable
Product, or any consequence thereof.
Performance Data
Data presented in Omron Company websites, catalogs and other materials is provided as a
guide for the user in determining suitability and does not constitute a warranty. It may rep-
resent the result of Omron's test conditions, and the user must correlate it to actual application
requirements. Actual performance is subject to the Omron's Warranty and Limitations of Liab-
ility.
Change in Specifications
Product specifications and accessories may be changed at any time based on improvements
and other reasons. It is our practice to change part numbers when published ratings or fea-
tures are changed, or when significant construction changes are made. However, some spe-
cifications of the Product may be changed without any notice. When in doubt, special part
numbers may be assigned to fix or establish key specifications for your application. Please con-
sult with your Omron's representative at any time to confirm actual specifications of pur-
chased Product.
Errors and Omissions
Information presented by Omron Companies has been checked and is believed to be accurate;
however, no responsibility is assumed for clerical, typographical or proofreading errors or
omissions.
Even if it conforms to all instructions in this safety guide, it isn't possible to guarantee
that a robot system will be free from an accident resulting in injury or death or con-
siderable damage to property caused by the industrial robot. It is the customer's
responsibility to implement appropriate security measures based on their own risk
assessment.
4 Mobile Robot HD Safety Manual 31500-100 RevA