Table of Contents
Advertisement
Instructions for use
Alarm texts
Alarm text
(51) OVERLOAD FEEDING AC-
TIVATED - REMOVE OBJECT -
RESTART FEEDING
(85) OVERLOAD FEEDING AC-
TIVATED - PRESS RESET
(52) FEEDER LIMIT SWITCH
ACTIVATED - REMOVE OB-
JECT FROM THE FEEDER LIM-
IT
(53) ALARM TRAY EXCHANG-
ER - CHECK TRAY EXCHANG-
ER
(54) TRAY DISPENSER OUT
OF POSITION - CHECK TRAY
DISPENSER
(55) TRAY DISPENSER FULL -
CHECK TRAY DISPENSER
(56) OVERLOAD CUTLERY
TRACK ACTIVATED - CHECK
AND RESTART FEEDING
(57) END LIMIT CUTLERY
TRACK ACTIVATED - CHECK
CUTLERY TRACK
(71) WASHING DETERGENT
ALARM ACTIVE - CHECK DE-
TERGENT DEVICE
(77) FINAL RINSE ERROR -
SENSOR ERROR FLOW ME-
TER BV02
(76) FINAL RINSE ERROR - NO
FLOW IN THE MACHINE
(75) FINAL RINSE ERROR -
LOW FLOW IN THE MACHINE
(83) TIME FOR MAINTENANCE
- CONTACT YOUR MAINTE-
NANCE SUPPLIER
WD-59CT & WD-66CT
Cause
An object has stopped the belt.
---
An object has activated the pho-
tocell (15).
The tray exchanger has
stopped.
The tray dispenser is in the
wrong position or there is no tray
dispenser in place.
---
The cutlery has jammed and has
activated the switch inside the
door (14).
The door (14) is not closed.
The detergent has run out.
---
The water supply is shut off.
The rinse nozzles (19) for the fi-
nal rinse are blocked.
---
36
Action
Remove the item. Start the feed by pressing but-
ton (5).
Reset the alarm by pressing button (9).
Remove the object. The conveyor will start auto-
matically.
Start the tray exchanger.
Adjust the dispenser if it is in the wrong position
or connect an empty dispenser to the machine
or tray exchanger.
Change the dispenser.
Open the door and remove the cutlery. Start the
feed by pressing button (5).
Close the door. The conveyor will start automat-
ically.
Check and fill with new detergent.
Reset the alarm by pressing button (9).
Check that the stopcocks on the incoming water
supply are open. Reset the alarm by pressing
button (9).
Clean the nozzles. Reset the alarm by pressing
button (9).
Contact service personnel. Reset the alarm by
pressing button (9).
Rev. 2.0 (20110124)
Advertisement
Table of Contents
