Table of Contents
Advertisement
Instructions for use
Unloading items manually
If the machine has stopped and you do not wish to wait for automatic unloading,
manual mode can be used to transport the dishware out of the machine.
Press button (4) for manual operation. The corresponding LED lights up.
Button for manual operation
If the machine is being run in manual mode and new trays are fed in, the machine
switches to automatic operation.
Button for selecting operating mode
Automatic or manual operation can also be selected by pressing one of the but-
tons (13) at the infeed/outfeed end.
66CT_29
Storage in the dispenser
If washed trays are being stored in the tray dispenser connected to the machine's
outfeed, the alarm lamp (16) shows yellow when the dispenser is full. If the ma-
chine is connected to a tray exchanger for two dispensers, the lamp shows a yel-
low light when both dispensers are full. The machine stops. When empty
dispensers are put in position, the machine starts automatically.
WD-59CT & WD-66CT
30
Rev. 2.0 (20110124)
Advertisement
Table of Contents
