Table of Contents
Advertisement
Instructions for use
4.2 Using the machine
4.2.1 Washing
Setting for normal or heavily soiled loads (Extra equipment)
If the machine has this function, you can change the wash pressure using lever
(24). Put the lever in the position for normal loads when washing normally soiled
items.
When the lever is in the position for heavily soiled loads, heavily soiled items can
be washed.
Soaking and pre-rinse
Before items are fed into the machine, they must be soaked to remove dried-on
pieces of food.
When washing heavily soiled loads, the items must be rinsed off before being fed
into the machine.
Washing with automatic operation
For automatic operation, press button (3). The corresponding LED lights up.
Button for automatic operation
•
The cutlery is normally removed from the trays using a cutlery sorter.
•
Trays with cutlery are transported on a tray conveyor. The trays are fed into
the machine automatically.
•
Cutlery must not be placed directly on the tray conveyor. It must be placed
on the trays.
•
The wash and rinse process will start automatically when the trays and cut-
lery are fed into the machine.
•
If no new trays are fed in, the machine will stop. After a while the trays and
cutlery are automatically removed from the machine.
WD-59CT & WD-66CT
29
Rev. 2.0 (20110124)
Advertisement
Table of Contents
