Chapter 1 Installation; Installing An External Faxmodem - Zoom 2812 Owner's Manual

Chapter 1 Installation

This chapter explains how to install external and internal
faxmodems.

Installing an External Faxmodem

To connect the external faxmodem
1
Turn off the computer.
2
Connect the faxmodem-to-computer cable. Plug one
end of the cable into the wide connector on the back
of the faxmodem. Plug the other end into the serial
port in the back of your computer.
3
Connect the telephone cord. Plug one end of the
cord provided with the modem into the PHONE LINE
jack on the back of the faxmodem. Plug the other end
into the telephone line connection (typically mounted
on a wall), just as you would a standard telephone.
You can plug a telephone into the faxmodem's other
jack, marked PHONE. The faxmodem works with or
without a telephone connected to it.
4
Connect the power adapter. Plug one end of the
power adapter into the back of the faxmodem. Plug
the other end into an available electrical outlet. You
can leave the power adapter plugged in when you are
not using the faxmodem.
8 56K Faxmodem Owner's Manual