Zoom 2812 Owner's Manual page 13

hardware installation. Remember, your computer
should be located near a phone jack.
2
Take the cover off your computer. This is a little
different for every computer. If you are not familiar
with the procedure, consult your computer's manual
for more detailed instructions.
3
Locate an available 16-bit slot (see the illustration
below).
Note that the faxmodem has two sections of gold con-
necting fingers. A 16-bit slot has double connectors to
match the fingers.
4
Unscrew and remove the metal cover plate on the
rear of the computer that lines up with the 16-bit slot.
This plate is similar to the bracket on the faxmodem.
Put the plate and screw aside.
5
Plug the faxmodem firmly into the 16-bit slot. Be
sure that the bracket is lined up properly, then screw
the bracket into the computer with the screw you re-
moved with the cover plate.
Chapter 2 Using the Faxmodem 13