Chapter 1 Installation; To Install Your Faxmodem - Zoom ComStar XT SVD Owner's Manual

Chapter 1
Do not handle any internal modem card when the phone
line is plugged into it. The voltages present when the line
If you need to remove the card for any reason, simply remove
the phone line from the internal card before handling it.
1
Before you start the hardware installation, turn your computer
off and unplug it. Don't plug it back in or turn it on until you
complete the faxmodem hardware installation. Remember,
your computer should be located near a phone jack.
2
Take the cover off your computer. This is a little different for
every computer. If you are not familiar with the procedure,
consult your computer's manual for more detailed instruc-
tions.
3
Locate an available 16-bit slot (see the illustration on the next
page).
Note that the faxmodem has two sections of gold connecting
fingers. A 16-bit slot has double connectors to match the
fingers.
4
Unscrew and remove the metal cover plate on the rear of the
computer that lines up with the 16-bit slot. This plate is similar
to the bracket on the faxmodem.
Put the plate and screw aside.
5
Plug the faxmodem firmly into the 16-bit slot. Be sure that the
bracket is lined up properly, then screw the bracket into the
computer with the screw you removed with the cover plate.
ComStar SVD Owner's Manual
Installation
CAUTION!
is ringing are potentially harmful.
8