Confirming The Installation - Zoom 2985C User Manual

Confirming the Installation

Your computer should be turned on.
Windows 98SE/Me users: From the computer's desktop, go
1
to Start | Settings | Control Panel and double-click the
Modems icon.
Windows 2000 users: From the computer's desktop, go to
Start | Settings | Control Panel | Phone and Modem Op-
tions and then click the Modems tab.
Windows XP users: From the computer's desktop, go to
Start | Control Panel | Printers and Other Hardware and
double-click the Phone and Modem Options icon and then
click the Modems tab.
•
If prompted, enter your location information.
•
Click the entry for your modem and then click
Properties.
•
Set the Maximum speed to the highest speed available
(probably 115,200). This sets the speed at which the
computer communicates internally with the modem.
Click the Diagnostics or Modem tab. Click More info or
2
Query Modem. If displayed, make a note of the Port and
Interrupt entries (if displayed). This step also tests the mo-
dem. You will see a list of AT commands and responses,
indicating that your new modem is properly connected.
IMPORTANT: If you already had a modem installed in your com-
puter, you'll need to redirect your application software so that it rec-
ognizes your new modem. Please turn to page 15 for instructions.
Otherwise, continue below.
Tip: If your modem is not working, try turning off your computer and
restarting it. If restarting your computer doesn't work, please
consult the Troubleshooting section on page 15.
Installing Your USB Faxmodem 5