Table of Contents
Advertisement
Image 4–6
3.
Drive in the 4 M10 screws. Use a torque wrench with 8 mm Allen bit.
Caution:
Fasten the six screws with a torque of 20 Nm.
4.
Mount the six M8 hex screws (reference 1) + spring washer (reference 2) + plain washer (reference 3) on
the bottom of the rigging frame to tie the two together.
Caution:
Fasten the six screws with a torque of 20 Nm.
Image 4–7 Mounting location of the M8 hex screws
5.
Lift the rigging frame with projector up and flip it upside down.
6.
Install the four locking pins (reference 1
1
Image
4–8) in the top stacking pins.
1
2
3
R5913458 /01
Rigging frame
20 Nm
20 Nm
G100
53
Advertisement
Table of Contents
