Table of Contents
Advertisement
Line Voltage Selection
To change the line voltage selection:
1. Remove the line cord.
2. Check if the line voltage displayed in the window must be changed.
3. Open the door using a small flat-bladed screwdriver.
4. Rotate the cylinder so that the correct line voltage appears in the location under the window.
5. Pull the fuse drawer out and check if the fuse is correct for the line voltage that you have selected
(see Table 2-1). If the rating is incorrect, replace the fuse with the correct one.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
3
2
4
1
5
D
107
Advertisement
Table of Contents
