Table of Contents
Advertisement
Table 6-1. Subsystem Commands Syntax (continued)
[SOURce:]
CURRent
[:LEVel]
[:IMMediate][:AMPLitude] <n>, (@list)
:TRIGgered [:AMPLitude] <n>, (@list)
:LIMit [:POSitive]
[:IMMediate][:AMPLitude] <n>, (@list)
:BWIDth <bandwidth> , (@list)
:TRIGgered [:AMPLitude] <n>, (@list)
:MODE <mode>
, (@list)
DELay
[:TIME]
(@list)
<n>,
:MODE <mode>
(@list)
,
FUNCtion
:MODE <mode>
, (@list)
VOLTage
:ALC
:BWIDth <bandwidth> , (@list)
[:LEVel]
[:IMMediate][:AMPLitude] <n>, (@list)
:TRIGgered [:AMPLitude] <n>, (@list)
:MODE <mode>
, (@list)
:PROTection
[:STATe] <bool>, (@list)
STATus
:OPERation
[:EVENt]? (@list)
:CONDition? (@list)
:ENABle <n>, (@list)
:NTRansition<n>, (@list)
:PTRansition<n>, (@list)
:PRESet
:QUEStionable
[:EVENt]? (@list)
:CONDition? (@list)
:ENABle <n>, (@list)
:NTRansition<n>, (@list)
:PTRansition<n>, (@list)
SYSTem
:ERRor?
:VERSion?
TRIGger
:ACQuire
[:IMMediate]
:SOURce <source>
[:TRANsient]
[:IMMediate]
:SOURce <source>
NOTE:
Some [optional] commands have been included for clarity. Refer to chapter 6 for a
complete description of all programming commands.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Sets the output current (in current priority mode)
Sets the triggered output current (in current priority mode)
Sets the current limit (in voltage priority mode)
Sets the output compensation bandwidth
Sets the triggered current limit (in voltage priority mode)
Sets the current trigger mode (FIXed | STEP)
Sets the output settling delay time in Manual mode
Sets the output settling delay mode (AUTO | MANual )
Sets the output mode (VOLTage | CURRent)
Sets the output compensation bandwidth
Sets the output voltage (in voltage priority mode)
Sets the triggered output voltage (in voltage priority mode)
Sets the voltage trigger mode (FIXed | STEP)
Enables/disables overvoltage protection on the selected output
Returns the value of the event register
Returns the value of the condition register
Enables specific bits in the Event register
Sets the Negative transition filter
Sets the Positive transition filter
Presets all enable and transition registers to power-on
Returns the value of the event register
Returns the value of the condition register
Enables specific bits in the Event register
Sets the Negative transition filter
Sets the Positive transition filter
Returns the error number and error string
Returns the SCPI version number
Triggers the measurement immediately
Sets the measurement trigger source (BUS | EXTernal)
Triggers the output immediately
Sets the output trigger source (BUS | EXTernal)
Language Dictionary - 6
55
Advertisement
Table of Contents
