Sony MCC-3000MT Service Manual page 53

2-13. PS-772 Board
Preparation
1. Remove the top cover. (Refer to
Procedure
1. Remove the four screws.
PS-772 board block
2. Remove the two claws and Remove the PS bracket in the arrow direction.
3. Disconnect the three harnesses from the three connectors (CN1, CN2 and CN3) on the PS-772 board.
MCC-3000MT
"2-2. Top Cover". )
Holes
B3 x 6
This illustration shows the removal of the PS-722 board for
CAMERA A.
The same method applies to the removal of the PS-722 board
for CAMERA B.
B3 x 6
2-21