2-4.
LCD Module
Preparation
1.
Remove the top cover. (Refer to
2.
Remove the front assembly. (Refer to
Procedure
1.
Remove the five screws to detach the front frame.
Front frame
2.
Remove the four screws to detach the four insulate spacers and LCD module.
3.
Remove the two solders to detach the two harnesses.
Solders
4.
Install the removed parts by reversing the steps of removal.
MCC-3000MT
"2-2. Top
Cover". )
"2-3. KY-687
Board". )
PSW2 x 6
Insulate spacers
B3 x 6
Harnesses
PSW2 x 6
Insulate spacers
LCD module
B3 x 6
2-7