2-11.
CN-3549 Board
Preparation
1.
Remove the top cover. (Refer to
Procedure
1.
Remove the two screws to detach the CN-3549 board in the arrow direction.
2.
Disconnect the harness from the connector (CN603) on the CN-3549 board.
Note
When installing the CN-3549 board, fit the two bosses with the two holes.
3.
Install the removed parts by reversing the steps of removal.
MCC-3000MT
"2-2. Top
Cover". )
CN603
Harness
PSW3 x 6
Holes
CN-3549 board
Bosses
2-18