11. Disconnect the harness from the connector (CN600) from the AVP-18 board.
CN1400
Flexible flat cable
CN803
AVP-18 board
Harness
CN900
Note
When installing, arrange the harness as shown in the figure.
12. Remove the four screws to detach the main board assembly (for CAMERA B).
Main board assembly
(for CAMERA B)
Note
When installing the main board assembly (for CAMERA B), fit the two bosses with the two holes.
13. Install the removed parts by reversing the steps of removal.
MCC-3000MT
Harness
CN1301
DPR-340
board
CN1700
Coaxial cable
B3 x 6
Hole
Bosses
Coaxial cable
CN600
Hole
B3 x 6
Harness
Clamps
2-12