Chapter 3 Device Management; Add Hikvision Device(S) Managed In Hik-Proconnect - HIKVISION Hik IP Receiver Pro User Manual

The Hik IP Receiver Pro can manage multiple device types, e.g. network camera, DVR, NVR, and AX
Pro security control panel. After adding devices to the Hik IP Receiver Pro and configuring alarm
service and zone, the Hik IP Receiver Pro can transmit alarms and videos from these devices to
ARC.
Add Device
You can add Hikvision devices managed in the Hik-ProConnect to the Hik IP Receiver Pro, or add
one or more third-party devices to the Hik IP Receiver Pro.
Enable Receiving Alarm and Set Zone
After adding devices to the Hik IP Receiver Pro, you can enable alarm service and add zone for
these devices, and then link channels to zones to transmit videos from linked channels to ARC.

3.1 Add Hikvision Device(s) Managed in Hik-ProConnect

You can add Hikvision devices managed on Hik-ProConnect to the Hik IP Receiver Pro. After adding
the devices to Hik IP Receiver Pro, the Hik IP Receiver Pro can transmit alarms triggered by these
devices to ARC.
Before You Start
Make sure you have accessed the Hik IP Receiver Pro to Hik-ProConnect. See Access Hik-
ProConnect for details.
Steps
Note
This function should be supported by device. Devices including AX Pro security control panel, NVR,
DVR, and network camera support this function.
1. On the Device page, click Add to enter the Add Device page.
2. Check Hik Device as the Device Type.
Devices managed on Hik-ProConnect are displayed in the Choose Device field.
3. Check devices and click Next.
4. Enter account ID.
Note
The account ID should contain only 4 digits, and should be the same with the account ID
configured on ARC.
5. Check to-be-added devices and click OK.
Hik IP Receiver Pro User Manual

Chapter 3 Device Management

5