HIKVISION Hik IP Receiver Pro User Manual page 8

Example
If the IP address of the computer running Hik IP Receiver Pro service is 172.6.21.96, and the
port number is 80, and you should enter http://172.6.21.96:80 in the address bar.
2. Enter the password and confirm password for the admin user in the pop-up Activate Hik IP
Receiver Pro window.
Note
We highly recommend you change the password of your own choosing (using a minimum of 8
characters, including at least three kinds of following categories: upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of your product.
3. Click Activate.
The Hik IP Receiver Pro is activated. And a notification for configuring Hik-ProConnect account
prompts.
4. Click Configure to enter the Hik-ProConnect Configuration page, and configure Hik-ProConnect
parameters.
Note
If you want to configure the Hik-ProConnect parameters later, click Cancel. You can go to the
Hik-ProConnect Configuration page to configure the parameters after logging into the Hik IP
Receiver Pro. See Access Hik-ProConnect .
Hik IP Receiver Pro User Manual
4