Chapter 5 Storage Settings; Set Downloading Time And Select Storage Disk For Alarm-Related Videos - HIKVISION Hik IP Receiver Pro User Manual

Two storage modes are provided: PC disk storage or Recording Server.
• Storage Disk: Alarm-related videos will be stored in the selected disk of your PC, and you can set
the downloading time for the alarm-related videos.
• Recording Server: After connecting the Hik IP Receiver Pro to the Recording Server, you can back
up alarm-related videos to the Recording Server by the Hik VideoPlugin. When you need a
second video verification for alarm-related details, you can view the video stored in Recording
Server by the Hik VideoPlugin.
5.1 Set Downloading Time and Select Storage Disk for Alarm-Related
Videos
You can set the downloading time of alarm-related videos and select storage disk for the
downloaded videos.
Steps
Note
The videos could not be stored normally with free space less than 200 MB. Please make enough
free space to avoid storage failure. We recommend 50 GB or above.
1. Click Configuration → Storage → Storage Settings to enter the Storage Settings page.
2. Set the time for downloading alarm-related video.
Before Alarm
Take 10 as an example, the Hik IP Receiver Pro starts downloading alarm-related videos 10
seconds before an alarm is triggered. This value ranges from 3 to 100, and is 10 by default.
After Alarm
Take 10 as an example, the Hik IP Receiver Pro stops downloading alarm-related videos 10
seconds after an alarm is triggered. This value ranges from 4 to 100, and is 10 by default.
3. Select a disk to store the files.
4. Click Save to save the settings.
Note
The videos and pictures will be saved in the default folder for 48 hours, after which they will be
deleted automatically.
Hik IP Receiver Pro User Manual

Chapter 5 Storage Settings

15