HIKVISION Hik IP Receiver Pro User Manual page 23

Receiver Number
The number used for marking the Hik IP Receiver Pro as an information receiver. You can
customize this parameter. Keep it the same with the number set on third-party system.
Linecard Number
The number of the line used for communication between the Hik IP Receiver Pro and
third-party system. You can customize this parameter. Keep it the same with the number
set on third-party system.
Manitou
IP Address
Enter the IP address of the Manitou system, which supports Manitou protocol.
Port
The port used for connection with the Manitou system which supports Manitou protocol.
By default, the port number is 1025.
Line
Line number, which ranges from 1 to 999.
Link Mode
There are two link modes: dedicated and discontinuous.
Test Signal Interval
It ranges from 60 to 300. Valid when the link mode is discontinuous.
SBN
IP Address
Enter the IP address of the SBN system, which supports SBN protocol.
Port
The port used for connection with the SBN system, which supports SBN protocol. By
default, the port number is 1025.
5. Click Save.
• Automation Status: For Sur-Gard protocol, the status means whether the Hik IP Receiver Pro
can receive data from the third party system, which supports Sur-Gard protocol.
Hik IP Receiver Pro User Manual
19