Chapter 6 Automation Output Management; Configure Protocol Parameters - HIKVISION Hik IP Receiver Pro User Manual

Chapter 6 Automation Output Management

You need to configure related protocol parameters to conduct communication between the Hik IP
Receiver Pro and the ARC. You can also view the real-time events triggered by the devices and add/
edit event information.
The Hik IP Receiver Pro can communicate with the ARC by Sur-Gard protocol, Ademco 685
protocol, Manitou protocol, and SBN protocol. So that you need to configure the parameters which
are supposed to be the same with those parameters configured in the protocol. Meanwhile, the
Hik IP Receiver Pro supports viewing and managing CID events, encoding events, and device
online/offline events. You can view event details and add/edit/delete an event.

6.1 Configure Protocol Parameters

To perform communication between the Hik IP Receiver Pro and the third-party system, you need
to configure protocol parameters first.
Steps
1. Click Automation Output → Protocol .
2. Check Enable to enable the protocol you selected below.
3. Select a protocol from the Protocol Type list.
4. Configure the parameters of the selected protocol.
Sur-Gard
TCP/IP
Used for communication between the Hik IP Receiver Pro and third-party system.
Server
The Hik IP Receiver Pro works as a server for communication.
Client
The Hik IP Receiver Pro works as a client connecting to third-party system which works
as a server for communication. You need to provide the third-party system's IP address
if you select this mode.
Port
The port used for communicating with the third-party system. By default, the port
number is 1025.
RS-232
Used for communication between the Hik IP Receiver Pro and third-party system.
Serial Port
By default, the serial port is COM1.
Hik IP Receiver Pro User Manual
17