HIKVISION Hik IP Receiver Pro User Manual page 26

Hik IP Receiver Pro User Manual
Click Automation Output → Event to enter the Event Configuration page.
On the Encoding Device page, select an event type and click to edit the event's target code and
event description.
On the Device Online/Offline page, select an event type and click to enable/disable this event,
or edit the event's target code and event description.
Note
• Event target code should be the same with the target code configured on the ARC.
• If you do not check Enable of the Device Online/Offline, the Hik IP Receiver Pro will not transmit
the events to the ARC.
22