HIKVISION Hik IP Receiver Pro User Manual page 22

Baud Rate
Keep it the same with the baud rate set on third-party system.
Data Bit
Keep it the same with the data bit set on third-party system.
Parity
Keep it the same with the parity set on third-party system.
Stop Bit
It cannot be edited and is 2 by default.
Compatibility
The versions of Sur-Gard protocol.
Receiver Number
The number used for marking the Hik IP Receiver Pro as an information receiver. You can
customize this parameter. Keep it the same with the number set on third-party system.
Linecard Number
The number of the line used for communication between the Hik IP Receiver Pro and
third-party system. You can customize this parameter. Keep it the same with the number
set on third-party system.
Heartbeat
If you select Sur-Gard as the protocol type, check Enable Heartbeat to enable heartbeat
between the ARC and the Hik IP Receiver Pro.
Hik IP Receiver Pro Heartbeat Interval
It ranges from 10 to 65535 seconds. It is 30 by default.
Device Heartbeat Interval
It ranges from 10 to 65535 seconds. It is 30 by default.
Ademco 685
Serial Port
By default, the serial port is COM1.
Baud Rate
Keep it the same with the baud rate set on third-party system.
Data Bit
Keep it the same with the data bit set on third-party system.
Parity
Keep it the same with the parity set on third-party system.
Stop Bit
Select 1 or 2 and it is 2 by default.
Hik IP Receiver Pro User Manual
18