Network Settings; Edit Port - HIKVISION Hik IP Receiver Pro User Manual

3. Select the log level.
Note
• Only the logs with the log level higher than the configured level can be recorded.
• The log level is Warning by default. We recommend setting Debug as the log level to make it
easier to find error details. If you select Debug as the log level, the Hik IP Receiver Pro
performance will be degraded.
4. Click Save to save the settings.
5. Optional: Click Export to download logs to your PC.

4.4 Network Settings

You need to configure network parameters of the Hik IP Receiver Pro correctly to ensure the
normal communication.
Various network configuration services are provided, including port editing, NIC card switching,
Network Address Translation (NAT) configuration, and HTTPS certification installation.

4.4.1 Edit Port

Some default ports of the Hik IP Receiver Pro can be edited if they are already used by other
services.
Click Configuration → Network → Port , edit the platform port numbers and device port numbers
and save the port settings. The port status indicates whether the ports are already occupied.
Normal
The port is not occupied.
Conflict
The port is already occupied. You need to enter another port number to avoid communication
failures.
Platform Port
Click Platform Port to edit the following ports used for data transmission from devices to the Hik IP
Receiver Pro.
HTTP Port
Used for web browser access in HTTP protocol. By default, the HTTP Port is 80.
HTTPS Port
By default, the HTTPS Port is 443.
Hik IP Receiver Pro User Manual
11