Set Recording Server For Second Video Verification - HIKVISION Hik IP Receiver Pro User Manual

5.2 Set Recording Server for Second Video Verification

A Recording Server is used for backing up alarm-related videos from devices added to the Hik IP
Receiver Pro. You can back up an alarm-related video to the Recording Server by the Hik
VideoPlugin. When you need a second video verification for alarm-related details, you can view the
video stored in Recording Server by the Hik VideoPlugin.
Before You Start
Make sure you have properly installed, activated, and configured Recording Server beforehand.
Steps
1. Click Configuration → Storage → Recording Server to enter the Recording Server page.
2. Configure Recording Server parameters.
Address
Enter the Recording Server's IP address.
Port
Enter the port number of the Recording Server.
User Name
Enter the user name of the Recording Server.
Password
Enter the password of the Recording Server.
Enable WAN Access
If the Recording Server belongs to different network domain from the Hik IP Receiver Pro or
the Hik VideoPlugin, enable this function to enable mapping between the Recording Server
and the Hik IP Receiver Pro/Hik VideoPlugin.
WAN IP Address
Enter the mapped IP Address of the Recording Server.
WAN Port Number
Enter the mapped port number of the Recording Server.
3. Click Save to connect the Hik IP Receiver Pro to Recording Server.
Connect Status
Connected indicates that the Hik IP Receiver Pro is connected to the Recording Server, and
you can back up alarm-related videos to the Recording Server by the Hik VideoPlugin.
Not Connected indicates that the Hik IP Receiver Pro is not connected to the Recording
Server, and you will fail to back up alarm-related videos to the Recording Server by the Hik
VideoPlugin.
Hik IP Receiver Pro User Manual
16