Add Single Third-Party Device; Add Third-Party Devices In A Batch - HIKVISION Hik IP Receiver Pro User Manual

The added devices are displayed on the Device page.
6. Optional: Perform the following operations if necessary.
Edit Device
Delete Device
Enable Alarm Service
and Set Zone

3.2 Add Single Third-Party Device

You can add a third-party device to the Hik IP Receiver Pro by entering device account ID and
device name.
Steps
1. On the Device page, click Add to enter the Add Device page.
2. Check Third-Party Device as the Device Type.
3. Select Single Adding as the Adding Mode.
4. Enter account ID and device name.
Note
The account ID should contain only 4 digits, and should be the same with the account ID
configured on ARC.
5. Click OK.
6. Optional: Perform the following operations if necessary.
Edit Device
Delete Device
Enable Alarm Service
and Set Zone

3.3 Add Third-Party Devices in a Batch

When there are multiple third-party devices to add, you can enter the device information in a
predefined template and then import it to the Hik IP Receiver Pro to add them in a batch.
Steps
1. On the Device page, click Add to enter the Add Device page.
2. Check Third-Party Device as the Device Type.
3. Select Batch Import as the Adding Mode.
4. Click Export and save the predefined template (CSV file) on your PC.
Hik IP Receiver Pro User Manual
Click to edit device's account ID.
Click to delete a device; or check multiple devices and click
Delete to delete the checked devices.
See Enable Alarm Service and Set Zone for details.
Click to edit device's account ID and device name.
Click to delete a device; or check multiple devices and click
Delete to delete the selected devices.
See Enable Alarm Service and Set Zone for details.
6