Set Https - HIKVISION Hik IP Receiver Pro User Manual

Note
• By default, the Hik IP Receiver Pro will restart automatically after saving the settings.

4.4.4 Set HTTPS

HTTPS provides authentication of the web site and its associated web server, which protects
against attacks. For example, if you set the port number as 443 and the IP address is 192.168.1.64,
you may access the device by entering https://192.168.1.64:443 via a web browser. The Hik IP
Receiver Pro provides three installing methods of HTTPS certificate.
Steps
1. Click Configuration → Network → HTTPS to enter the HTTPS Setting page.
2. Check one of the installation methods to set HTTPS certificate.
Create self-signed
certificate.
Signed certificate is
available, start the
installation now.
Create the certificate
request first and
continue the
installation.
There will be the certificate information after successfully creating and installing the certificate.
3. Check Enable to enable the installed certificate.
4. Click Save to save the settings.
Hik IP Receiver Pro User Manual
Enter the Country, Domain/IP, Validity and other information, and
then click Save.
Note
If you already had a certificate installed, the "Create self-signed
certificate." is grayed out.
Click Browse to select a signed certificate saved in the PC, and then
click Install.
a. Click Create to create the certificate request. Enter the required
information in the pop-up window and click OK to save.
b. Download the certificate request and submit it to the trusted
certificate authority for signature.
c. After receiving the signed valid certificate, click Browse to select
the downloaded certificate saved in the PC, and then click
Install.
13