Enable Alarm Service And Set Zone - HIKVISION Hik IP Receiver Pro User Manual

Hide thumbs Also See for Hik IP Receiver Pro:
Table of Contents

Advertisement

5. Open the exported template file and enter the required information of the devices to be added.
Account ID
The account ID should contain only 4 digits, and should be the same with the account ID
configured on ARC.
Device Name
You can custom the device name.
6. Click Import and select the edited template.
7. Click OK to import the device information to the Hik IP Receiver Pro.
The devices are added to the Hik IP Receiver Pro and displayed on the device list.
8. Optional: Perform the following operations if necessary.
Edit Device
Delete Device
Enable Alarm Service
and Set Zone

3.4 Enable Alarm Service and Set Zone

To receive and transmit alarms sent by devices added to Hik IP Receiver Pro, you should enable
alarm service and set zone for them beforehand. For AX Pro with zones and linked channels
already configured on the device configuration page, the Hik IP Receiver Pro can transmit alarms
and videos once the alarm service is enabled. For encoding device, only if you have set zones and
linked channels to zones can the Hik IP Receiver Pro can transmit alarms and videos from the linked
channels to ARC for verification.
Before You Start
• Make sure you have added at least one device to the Hik IP Receiver Pro.
• If you are going to link channels to devices managed by the Hik-ProConnect, make sure you have
accessed the Hik IP Receiver Pro to Hik-ProConnect. See Access Hik-ProConnect for details.
Steps
1. On the Device page, select a device and click
service and zone settings page.
2. Check Enable Alarm Service to enable alarm service.
Note
• By default, it is enabled.
• If this function is disabled, the Hik IP Receiver Pro will not receive or transmit alarms from this
device.
Hik IP Receiver Pro User Manual
Click
to edit device's account ID and device name.
Click
to delete a device; or check multiple devices and click
Delete to delete the checked devices.
See Enable Alarm Service and Set Zone for details.
in the Operation column to enter the alarm
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents