Shutter/Gain Tab - Omron STC-S133UVC-BL Product Specifications And User's Manual

Shutter/Gain Tab

Exposure Control Mode (Default: AE)
AE
The brightness level is adjusting with the shutter and gain automatically.
It is necessary to set the shutter and the gain at "Normal AE" Tab.
HOLD
The shutter and gain are holding. When the brightness of the target is changed, the camera does not adjust the brightness.
Scale ME
The brightness level is adjusting by the shutter and gain settings.
User Preset ME
The brightness level is adjusting by the preset shutter and gain.
Full ME
The brightness level is adjusting the manually by the shutter and gain at "Full ME" Tab.
Convergence luminance
Set the convergence luminance for AE. (Default: 12,828)
AE convergence speed setting
Set the AE convergence speed. When set greater value, the AE convergence speed increases. (Default: 216)
Frame count for dead band
Set the number of the frame that uses for the AE control start judgement. (Default: 2)
Dead band / AE tracking AE
Set the AE convergence stop condition.
AE convergence is stopped when AE error is less than this setting and keeps the same condition more than three frames.
(Default: 26)
Dead Band / AE convergence AE
Set the AE convergence start condition.
AE convergence starts when AE error is greater than this setting and keeps the same condition more than the frame counter
of the dead band. (Default: 4)
EV correction
Set the amount of the exposure. (Default: 0)
STC-S133UVC
Product Specifications and User's Guide
No.17S021-01
27/63