Table of Contents
Advertisement
4.2
Connector specifications
Power input / video output / UART communication connector
CN2 connector
Pin assignment
No.
Signal name
1
GND
2
DC12V
3
GND
4
VIDEO_OUT
5
EXSI
6
EXSO
7
WB_LOCK
8
GND
*1 To use this function as following procedure requires.
①Sets Auto to Push Lock through OSD menu or communication
②Sets WB_LOCK Switch ON and holds white
This setting can't be saved. When power off the camera, and turn on the camera, this WB setting didapper
To save the WB setting, OSD menu or communication requires.
STC-S133 Series
Specifications
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com
CN1
CN2
BM8B-SRSS-TB (JST)
Power GND
+12V dc power input
Video GND
Video signal output
UART input (3.3V CMOS)
UART output (3.3V CMOS)
White balance lock input *1
GND
OSD menu control
Power input / Video output / UART communication
Descriptions
No.16S061-09
12/55
Advertisement
Table of Contents
