Appendix E - Compliance; Federal Communications Commission Statement; Emc Directive Statement - SeaLevel 8003e User Manual

Appendix E – Compliance
This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in such case the user will be required to correct
the interference at the users expense.
Products bearing the CE Label fulfill the requirements of the EMC directive (89/336/EEC) and
of the low-voltage directive (73/23/EEC) issued by the European Commission.
To obey these directives, the following European standards must be met:
EN55022 Class A - "Limits and methods of measurement of radio interference characteristics of information
technology equipment"
EN55024 – "Information technology equipment Immunity characteristics Limits and methods of
measurement".
EN60950 (IEC950) - "Safety of information technology equipment, including electrical business equipment"
This is a Class A Product. In a domestic environment, this product may cause radio interference in
which case the user may be required to take adequate measures to prevent or correct the
interference.
Always use cabling provided with this product if possible. If no cable is provided or if an alternate cable is
required, use high quality shielded cabling to maintain compliance with FCC/EMC directives.
©Sealevel Systems, Inc.
SL9235 3/2013
8003e Manual 29