Supervisor level
Low water pressure
If the water pressure is below 100 kPa
(1 bar), the programme will be can-
celled and the fault message
will appear.
water inlet
If the on-site water pressure cannot be
increased, activating the setting
will prevent the programme
ter pressure
from being cancelled.
Factory default: On
Water level Cottons
You can increase the water level for
the main wash in the Cottons pro-
gramme.
- + 0 mm wc (factory default)
- + 10 mm wc
- + 20 mm wc
- + 30 mm wc
74
Water level Minimum iron
You can increase the water level for
the main wash in the Minimum
iron programme.
Check
- + 0 mm wc (factory default)
- + 10 mm wc
Low wa-
- + 20 mm wc
- + 30 mm wc
Cottons Pre-wash temp
You can select the temperature for the
pre-wash in the Cottons programme.
- 30 °C (factory default)
- 35 °C
- 40 °C
- 45 °C
Wash time Pre-wash
You can increase the duration for the
pre-wash in the Cottons programme.
- + 0 min (factory default)
- + 6 min
- + 9 min
- + 12 min