Table of Contents
Advertisement
Installation
Place the holding bracket on the front
appliance feet.
Mark the position of the front edge of
the holding bracket with a pencil.
Remove the holding bracket from the
feet.
Carefully move the washing machine
until you have enough space to install
the holding bracket.
60
Installing the holding bracket
Place the holding bracket on the
marking on the plinth.
In the middle of the two outer slotted
holes, mark a point for each drill hole.
Drill 2 holes (8 mm) with a depth of
approx. 55 mm.
Insert the plugs in the holes.
Install the holding bracket with the
hexagon screws and the washers.
Do not tighten the screws yet – this
will allow the holding bracket to be
moved sideways.
Hide quick links:
Advertisement
Table of Contents
