Foc Programmes; Delete Paid Signal; Debounce Time - Miele PWM 307 Operating And Installation Instructions

FOC programmes

In coin mode, you can decide whether
the Drain/Spin programme can be used
for free.
Factory default: Off

Delete paid signal

The "Paid" signal in coin box mode
can be applied until the end of the
programme or discarded if the pro-
gramme is not started after 5 minutes.
Factory default: Off

Debounce time

In coin mode, the debounce time for
the minimum payment signal that
must be applied can be adjusted.
- Factory setting: Short
For coin boxes where the falling coin
generates the paid pulse.
- Long
For central control units on a 230 V
basis.
Supervisor level
81