Delay Start; Programme Name; Visibility Parameters - Miele PWM 307 Operating And Installation Instructions

Supervisor level

Delay start

The type of time input for the Delay
start function can be changed or
switched off.
- Off
The Delay start function is not avail-
able for selection.
- End of programme (factory default)
With the Delay start function, you
specify at what time the wash pro-
gramme should end.
- Beginning of programme
With the Delay start function, you
specify at what time the wash pro-
gramme should begin.
- Time until start
With the Delay start function, you
specify after how many hours a pro-
gramme should begin.
SmartStart
The function of the  sensor control
changes when the SmartGrid setting
is activated and the Time until start
option is selected in the Delay start
setting. The period of time in which
the wash programme will start auto-
matically is then shown in the display:
SmartStart
The programme is started via an ex-
ternal signal.
The time period can be defined up to
24 hours. During this period, the wash-
ing machine waits for the external sig-
nal. If no signal is sent during the
defined period, the washing machine
starts the drying programme once the
defined period of time has elapsed.
72

Programme name

When selecting a standard pro-
gramme, the name of the selected
programme is shown in the display.
- On (factory default)
When a programme is selected, the
programme name is displayed for a
few seconds before the display
shows the main menu.
- Off
The main menu is displayed immedi-
ately.

Visibility parameters

Various parameters are offered/dis-
played when a programme is selected.
You can decide which parameters
should not be displayed. These para-
meters can then not be edited during
programme selection.
Factory default: all parameters are vis-
ible.