Table of Contents
Advertisement
Supervisor level
Temp reduction
The suds temperature can be reduced
to prevent the suds from boiling too
early in high-altitude locations.
Factory default: Off
Auto load control
This washing machine comes with
automatic load control. In some pro-
grammes, the water levels and the
programme cycle times are adapted to
the load. If the auto load control is de-
activated, the machine will always
carry out the programme sequence
based on a full load.
Factory default: On
COM module selection
This washing machine is equipped
with an integrated WiFi module.
- Off (factory default setting)
- Internal module
The internal WiFi module is used.
76
WiFi/LAN
Control the networking of your wash-
ing machine.
- Setup
This message only appears if the
washing machine has not yet been
connected to a WiFi network.
- Deactivate (visible if the network is
activated).
The network remains set up; the WiFi
function is switched off.
- Activate (visible if the network is de-
activated).
The WiFi function is reactivated.
- Connection status (visible if the net-
work is activated)
– The quality of WiFi reception
– The network name
– The IP address
- Set up again (visible if already set
up).
Resets the WiFi login (network) to im-
mediately re-establish a new connec-
tion.
- Reset (visible if already set up)
The network is no longer set up. A
new connection has to be estab-
lished in order to use the network
again.
– The WiFi is switched off.
– The WiFi connection will be reset
to the factory default setting.
Hide quick links:
Advertisement
Table of Contents
