Delay Start/Smartstart - Miele WWH860 WCS Operating Instructions Manual

 Delay start/SmartStart

Delay start
With the delay start function, you can
delay the start of the programme.
This function is active when the
setting SmartGrid is switched off.
The hours can be set from
The minutes can be set in 15 minute
increments from 00
Setting the delay start time
 Touch the  sensor control.
The following will appear in the display:
 
Start in
 
 Set the hours with the  sensor
controls. Confirm with the OK sensor
control.
The display will change:
 
Start in
 
 Set the minutes with the  sensor
controls. Confirm with the OK sensor
control.
Tip: The values will count upwards and
downwards automatically if you keep
your finger on the  sensor control.
to .
00 24
to 45 .
00 :00 h
OK
06: 00 h
OK
4. Select programme settings
Cancelling delay start
The selected delay start period can be
cancelled before the programme starts.
 Touch the  sensor control.
The selected delay start period will
appear in the display.
 Set a time value of
the   sensor controls. Confirm
with the OK sensor control.
The selected delay start time has been
cancelled.
After the programme has started, the
selected delay start period can only be
changed or cancelled by interrupting
the programme.
Altering delay start
The selected delay start time period can
be changed before the programme
start.
 Touch the  sensor control.
 Change the specified time and
confirm with the OK sensor control.
with
00:00 h
31