Circutor Computer SMART III FAST 6 Instruction Manual page 76

Press the
digits to be modified.
The key shows the next option.
The key shows the previous option.
Press
Press the
If no keys are pressed for 5 minutes, the unit switches to the simulation screen,
.
SCREEN"
 Connection type
If the connection with three currents has been selected (
voltage and the direction of the current is indicated in this screen.
76
key to enter editing mode. It is identified by the
to validate the data; the
key to access the next programming step.
Phases V measurement phase
PH1
PH2
PH3
PH4
PH5
PH6
3u3C
d
: direct.
i
: reverse.
symbol disappears from the display.
Table 45: Phase connection options�
L1-L2-L3
L1-L2-L3
L1-L2-L3
L1-L2-L3
L1-L2-L3
L1-L2-L3
3u3C
Computer SMART III FAST
symbol and the blinking of the
"5.30.- SIMULATION
CT connection phase
L1
L2
L3
L1 (inverted transformer)
L2 (inverted transformer)
L3 (inverted transformer)
), each current is associated with its
Instruction Manual