Novatron Xsite EASY User Manual page 8

Risk of injury caused by malfunction
Uncontrolled machine actions caused by the malfunction of a system component
Caution
can lead to severe personal injuries or cause material damage within the
machine's working range. Ensure that the machine is operated, controlled and
inspected by a qualified and experienced operator, who is capable of carrying out
emergency measures, such as an emergency stop.
Lacking instruction
Caution
Lacking or insufficient instruction can lead to operating errors or incorrect use. This
can lead to severe personal injuries, as well as significant material and
environmental damage. Observe the manufacturer's safety instructions and the
foreman's directives.
Risk of injury caused by insufficient safeguarding
Insufficient safeguarding of the construction site and the location of the component
Caution
(for example the position of the laser emitter), can lead to hazardous situations on
the construction site and surrounding traffic. Ensure sufficient safeguarding of the
construction site. Ensure sufficient safeguarding of the locations of each single
component. Observe the country-specific safety and accident prevention
regulations, as well as the current road traffic regulations.
Risks caused by faulty measurement results
Faulty measurement results due to use of a damaged (for example dropped)
Caution
product, improper use or alteration to the product can lead to severe material
damages. Do not use products showing obvious signs of damage. Before re-using
a component that has been dropped, carry out a test measurement to ensure
accurate readings.
Risk of injury caused by unreadable signs
In the course of time, labels and symbols on the product can become
Caution
unrecognisable due to dirt, wear or other damage. Labels and symbols can also
get detached. Always keep safety, warning and operation instructions in good
enough condition that they can easily be read. Regularly check the adhesiveness
of the labels and symbols on the product. Do not remove any labels or symbols
from the product.
Risk of injury caused by inappropriate disposal of the product
When burning plastic parts, toxic gases that can cause illnesses are emitted.
Caution
Dispose the product properly according to the current national country-specific
disposal regulations. Careless disposal might also enable unauthorized persons to
improperly use the product; in doing so, these persons and/or third parties might
be severely injured and also pollute the environment. At all times, protect the
product against access by unauthorized persons.
Xsite EASY | User manual | Page 5 of 52