Emerson Rosemount 2555 Quick Start Manual page 6

Quick Start Guide
• Plastics
— Plastic granulates, etc.
• Timber
• Chemicals
The level switch has a threaded, flanged, or Tri Clamp process connection for
mounting it onto a silo (or other vessel). You can mount it on a side wall of
the silo, so that it is level with the filling limit to be monitored. Alternatively,
if it has an extended length, mount it vertically on top of a silo to monitor the
maximum filling limit.
The length of the capacitance probe can be up to 98.4 in. (2.5 m) with a rod
extension tube or up to 787 in. (20 m) with an extension rope.
The use of a sliding sleeve is recommended so that the switching point can
be changed easily during the live operation of the level switch.
Note
The Rosemount 2555
6
Product Data Sheet has all dimensional drawings.
October 2020
Quick Start Guide