Connections - Aiwa CA-DW735 Operating Instructions Manual

CONNECTIONS
I
Q
r
Using the center unit coupled with the speakers +
Align the speakers with the guide brackets on either side of the
center unit. Slide each speaker down into the guide brackets until
the height is level with the center unit.
" Check that the speakers are attached securely.
Using the center unit separated from the speakers +
Slide the speakers up off the guide brackets, while pressing the
speaker release knob.
@ Speaker release knob
Take care not to stretch the speaker cords.
Connecting the speakers +
Connect the right speaker to the R terminal, and the left speaker
to the L terminal.
Open out the lever of the speaker terminals and insert the
conductor of the speaker cords with the white broken line into 0
and the other cords into O. Then, shut the lever to lock.
CAUTION
Be sure the AC power cord is disconnected and all functions are
off before making connections.
m
Refrain from using speakers with less than 4 ohms impedance,
or connecting two speakers to the same jack. Doing so could result
in damage to this system.
Connecting the external unit +
This unit can play sound signals input through the AUX/VIDEO
jacks. Use a cable with RCA plugs (not supplied) to connect audio
equipment that has a LINE OUT jack.
Connect the red plug to the R jack, and white plug to the L jack.
Listening to the other source+
To play the equipment connected to the AUXMDEO jack on the
rear panel, refer to the following,
1 Press the
AUX
button.
"AUX is displayed in the display window,
2 Play the external source.
Refer to the operating instructions of the connected equipment.
8